Printed Circuit Board Making – How To Make Better?

If you were a hobbyist and wanted to make a quick one-off PCB at home, there are several steps that you must follow. After preparing the PCB design, you then print out the separate 2D PCB layouts using a paper printer in printed circuit board Making. And then, go through the whole ironing and etching process for you to get your board ready with all the required copper traces. This practice is slowly going to disappear.

1. 3D PCB Printers

printed circuit board making.jpg

2.Flexible PCBs Making and Wearable Technology

Flexible PCBs

There has been an increase in the need to bring electronics closer and closer to our bodies. This is majorly due to health reasons. It is becoming more and more important to monitor human health every now. And then rather than waiting for a normal doctor checkup or waiting until you actually feel sick. Flexible PCB (FPCB) has come in handy to leverage wearable technology. The use of traditional rigid printed circuit board Making in wearable technology is getting minimized day after day. The copper tracks are now being build-up, and they are being made thinner and thinner. This makes wearables more comfortable to put on and more efficient in operation, especially where the wearable sensors’ data is transmitted wirelessly.

YouTube video


3. High-Density Interconnects PCBs (HDI PCBs)

Printed Circuit Board Making1

There is an obvious need for miniaturization. Whether you want to make a board for a wearable application, a new computer board, or just an Internet of Things (IoT) device, electronics components must be tiny to occupy so, the smallest space with superior performance in printed HDI technology, PCB components can be packed very close to each other and function even better. With microvias, which are about 140um, components can be densely packed to as close as 100um. But this is achieved without compromising the quality of the electrical signals involved.

Printed Circuit Board Making2
Avatar photo
Emma Lu
Our professional engineering support saves our customers a lot of trouble and loss. >>>>>> After you place the order, our engineer will conduct technical reviews to make sure the parts can be mounted well/correctly on the boards. We will check if the component packages match well with the Gerber footprints, if the part numbers you provided match well with the descriptions, and if the polarity is clearly marked. >>>>> When your design is ready, please send your Gerber and BOM so we can quote and start!