PCB Prototype Service – The Best Service Here

On PCB Prototype Service, our customer, John, a manager from a computer company in Australia, had finally said that I had found the right PCB Prototype Service company.

He has browsed many PCB companies’ websites, such as proto PCB, PCB cart, and WellPCB, which members of dorkbot recommended.

But at last, he decided on us, but the most crucial thing they considered was our free online service.

PCB Prototype Service.png

1. Customer Feedback

He recalls I was already 66 years old. I have experienced many companies and manufacturers, so many questions about their PCB prototype products and sales service to ask and inspect them.

Still, they were very professional and fully patient in answering me. Before that, I thought Chinese people often used low-cost and bad-quality products to cheat or mislead foreigners.

So at first, for a two or four-layer board with an 8/8 design or, more significantly. But now they have changed my mind.

Now, whenever I receive orders from my customers, I will give them to complete it; we have developed into good cooperative partners.

I also believe professionals who proved they could do well never let me down.

2. PCB Prototype ServiceIntroduce Us

WELLPCB focuses on Printed Circuit Board Fabrication and PCB Assembly Turnkey Services to meet the requirement of High Quality, low cost, fast delivery, and easy ordering from customers worldwide.

With brand new equipment and a total production area of over 10,000 sq. meters, WELLPCB can produce 100,000 square feet of 2-32 layer PCBs and deliver over 5000 varieties monthly.

We can make quick turns to meet 24-hour delivery for double-sided PCBs, 48-hour for 4 to 8 layers, and 120-hour for ten or higher PCBs.

If you have any questions, you can use online services to contact us; we will answer your questions the first time.

YouTube video

Avatar photo
Emma Lu
Our professional engineering support saves our customers a lot of trouble and loss. >>>>>> After you place the order, our engineer will conduct technical reviews to make sure the parts can be mounted well/correctly on the boards. We will check if the component packages match well with the Gerber footprints, if the part numbers you provided match well with the descriptions, and if the polarity is clearly marked. >>>>> When your design is ready, please send your Gerber and BOM so we can quote and start!

Services