Home - Blog

Panelization PCB-Ultimate Process Guide


Panelization PCB is one of the methods that help to design an array of PCBs into a single piece to make working on it easier. Unfortunately, there are no hard and fast rules that must be followed during the panelization process. Factors such as the thickness of the PCB, the construction, and the design play an important role in determining the guidelines to be followed during the process. Panelization is critical especially in cases where the PCB needs to fit in a given space. It will, therefore, help you come up with an array of designs that serve the need. 



3 Panelization PCB .png



1.Panelization PCB Methods


3.V-Groove and Perforated Methods

4.Breakaway-Tab Panelization PCB Method


1.Panelization PCB Methods

The choice of panelization method to use is determined by the design of your board and the number of components that are used. Also, it is important to consider the components that hang on the edge of the board before choosing a method of panelization which ensures that the right PCB array strength is achieved.


To improve the strength of the panel, solid tabs may be used. In such cases, laser- cutting machine depaneling router may be chosen. If you choose to use paneling router, you must be prepared to hold the fixtures tightly since it vibrates and produces a lot of dust and noise. Using the laser-cutting machine, on the other hand, is capital intensive and may be limited to just about 1 mm. Notice that solid tabs between boards should be removed using appropriate tools. Among the tools, you may opt to use include the hook-shaped blade tool.


Panelization PCB 1.png




Refers to the cutting of tabs to individual PCB boards. It is a manufacturing step that helps in cutting panels into multi boards. It aims at increasing the throughput of the printed circuit board. It allows for designing PCBs in a way that they consist of smaller PCBs which can be aligned and inserted into an array to form a final product.  


3.V-Groove and Perforated Methods

V-grooves and perforated tabs are the best depanelization methods you can use. In case of V-Groove panelization method, it requires that you cut 1/3 of the board at the top and another 1/3 at the bottom. The cutting may be done at an angle of 45 or 30 degrees. One may also need a cutting machine and other tools to effectively do the paneling.


Using V- groove method may cause a number of problems but it is the most preferred method because it does not allow components to hang over an edge and surface stress is greatly reduced. It is also economical because the machines used are inexpensive and require little maintenance and adjustment.


Most of such machines are portable and can easily be moved around when the need arises. Unfortunately, V-groove methods come with a lot of restrictions, especially where the components are hanging on the edge of your board. Also, it cannot be used to cut straight lines via the PCB array.


Panelization PCB .png



4.Breakaway-Tab Panelization Method

The method is suitable when V-grooves cannot be used. It keeps surface mounted parts away from perforation holes and helps to stop splintering and damaging the tabs. The method employs a three or five-hole pattern and tabs which are placed under overhanging parts.


In some cases, you may need to use removable knock-outs to help fill holes so as to prevent the solder from running into the board. In some cases, a five-hole breakout tab may be placed on any of the sides.


Hi, I am Hommer, the founder of WellPCB. So far we have more than 4,000 customers worldwide. Any questions you can feel free to contact me. Thanks in advance.