wellpcb

Reducing the Cost of PCB Printing

The cost of the PCB printing is variable and is dependent on the styling and number of layers which you use. If you are new in to the arena of PCB designing then you may not be able to optimize your PCB printing circuit to a standard cost point. Most of the beginners who are in the arena of PCB designing are not bothering the cost of the design but are only tangent towards the width, styling, and spacing of the design. However, it is very good technique to be caring towards the cost of the PCB printing along with other features to save money in future. The following are some major techniques to keep the cost of the circuits to a minimum.

      1.Keep the Area of the PCB Small

Make this a rule of thumb, the smaller would be the area of the PCB the better would it be in terms of cost effectiveness. Moreover, compact sizes of the PCBs area always preferred. The bigger PCBs would cover huge space and thus make the cost bigger as well.

       2.Use Standard Shapes

Some beginners or even expert PCB makers are after the designs and use different shapes for their circuits. It is a fact that the unusual shapes of the PCBs are often attractive but they are making the costs to elevate to a high level. Therefore, one must try to keep the shape and design of the PCB as simple as possible. The design such as following must be avoided.

     PCB printing1.png

 

       3.Keep the Spacing Minimum

Another rule of thumb is to keep the spacing in between the components minimum. This would also have a great impact when it comes to saving because this would make the PCB compact and the chances of discontinuity would be minimized.

pcb printing 2.png