Home - Blog

Super PCB-How To Find A Good Manufacturer

The factors that make a super PCB have seamless electronic particles flow through the circuit are the line spaces, sizes of the holes, and the material used. The printed circuit board experts strive to ensure that the current flow is error-free when manufacturing and designing the PCBs.

super PCB1.png

The following are some of the characteristics of PCBs that are reliable in every stage.

1.How to select your super PCB manufacturer

1.1 The high quality of the base material

The ability of the super PCB to conduct the electrons flow is determined by the reliability of the board. The capacity of PCB is achieved when the base material used is of an advanced quality that helps avoid problems like delamination caused by inflation and an open circuit. One should ensure that he tests the base material before it is put to use.

1.2 The copper clad being made tolerant

This should be as per the international standards that are set under the quality IPC4101 Class B/L. It is essential in that there is better control of dielectric layer thickness. The quality of components used should be good to complement the copper cladding.

1.3 Super PCBHole wall thickness

The whole wall is made with a thickness of 25 microns and clad with copper, making the board very reliable. This one helps the board be solid and able to resist the expansion along the Z-axis.

super PCB2.png

1.4 Super PCBA PCB without a track cut

A reliable PCB does not have any repair, be it by soldering or brake line repair. This makes the super PCB function perfectly, and the break of current flow is reduced to nil; hence the PCBs that do not have any soldering repair are highly reliable.

1.5 Impeccably clean PCB

PCBs should not have any dust or dirt on their surface. When the material is not clean, it can result in poor connections.

1.6 Treatments are done on the PCB

Circuit boards are made to undergo a series of quality tests before they are put to use. When PCB surface reaches treatment beyond the shelf life, it tends to absorb some moisture, making soldering difficult and leading to chances of circuit break.

1.7 Positional tolerance on PCB

A circuit board should have tracks, well-defined drill holes, and other mechanical features and shapes that are well outlined.

1.8 The thickness of solder resist layer

The thickness of the solder resistance should be tolerant enough to support electrical insulation. Thick solder reduces helps in reducing the risk of peeling, which can lead to exposing copper circuits to any corrosive agents that can be around.

1.9 Solder resistant material that is industry approved

The quality of solder material for resistance is defined by IPC– SM 840 standards which should not come out even under extreme conditions.

1.10 Purchase each of the parts as per the pre-defined buying program

When it comes to industrial buying, it should be by the plans of production and quality compliance.

2.Super PCBConclusion

super PCB3.png

Almost all PCB Manufacturers in China will offer you the lowest prices. WellPCB is one of the leading Super PCB Manufacturers in China. They manufacture any size of your PCB Design in small or large scale order. To make an order, you go to wellpcb.com and submit your PCB design Gerber files.

You can see this video to get an idea about WellPCB:

YouTube video

Avatar photo
Emma Lu
Our professional engineering support saves our customers a lot of trouble and loss. >>>>>> After you place the order, our engineer will conduct technical reviews to make sure the parts can be mounted well/correctly on the boards. We will check if the component packages match well with the Gerber footprints, if the part numbers you provided match well with the descriptions, and if the polarity is clearly marked. >>>>> When your design is ready, please send your Gerber and BOM so we can quote and start!