PCB Temperature: A Guide to How to Manage High Temperatures

While the concept of the PCB has certain fundamentals in its design that have remained unchanged for a long time, a technology that affects PCBs have changed rapidly over the last few decades.


One issue that remains constant is the issue of PCB temperature.


The physical shape of a PCB is made up of traces, holes, layers, through holes, and solder masks. Each of these things can be affected by PCB temperature.


A snowball effect of problems can occur if PCB temperatures rise linearly. If unchecked, this will negatively affect the performance of the PCB.


This article will provide an overview of the design of high-temperature boards and how temperatures can be micromanaged.

While the concept of the PCB has certain fundamentals in its design that have remained unchanged for a long time, a technology that affects PCBs have changed rapidly over the last few decades. One issue that remains constant is the issue of PCB temperature.

The physical shape of a PCB is made up of traces, holes, layers, through holes, and solder masks. Each of these things can be affected by PCB temperature.

A snowball effect of problems can occur if PCB temperatures rise linearly. If unchecked, this will negatively affect the performance of the PCB.

This article will provide an overview of the design of high-temperature boards and how temperatures can be micromanaged.

PCB Temperature Briefly

PCBs are typically put through different heat levels during regular operation. PCB temperature defines the degrees of heat the PCB can withstand during regular operation and in storage.

PCB temperature is standard, medium, or high temperature. 

PCB’s material determines the PCB temperature. For example, aluminum has one of the highest PCB temperatures, making it useful in heavy industrial use.

Causes of High PCB Temperature

PCB Temperature.jpg

The first step in micromanaging anything is to detect the source of the micromanagement needed.

PCB temperature is no exception, and since PCBs use heat to function, it is first necessary to determine the cause of the PCB’s high temperature.

High PCB temperature can lead to performance issues. When currents are too strong throughout a PCB, temperatures will rise.

There are three telltale signs of this anomaly.

Component dissipation

It is the first sign that temperatures in a PCB are rising too high. One thing to remember here is that heat generated by a component is directly proportional to the load current that flows through the said component.

In this particular case, component dissipation occurs when one component of the PCB is not generating the kind of power it usually generates. It causes other features to create more energy than usual to balance out the dissipating component.

If the current that travels through a resistor is inconsistent, the capacitor and other major circuit board components will carry a more significant charge than usual to compensate.

Through Hole

PCB Temperature.jpg

One of the most common things that provide power to a component is the heat sink. Heat sink components are also known as through-hole components.

These components generate heat by dissipating heat in the air. The heat sink makes this possible, and one way you can micromanage PCB temperatures here is to see if the heat sink is soldered correctly.

If another component on the PCB is interfering with through-holes or heat sinks, this will cause the other features to work overtime to generate more heat than necessary.

SMD components

PCB Temperature.jpg

SMD stands for “surface-mount device.” It is connected to a PCB just like a through-hole component is and allows currents to travel smoother among the through-hole and heat sink components.

As far as maintaining PCB temperatures is concerned, one of the most common issues that one can encounter pertains to the position of the through-hole components on the PCB relative to the SMD components. 

If they are too far away, it might take too long for the power to travel to and from these components. It can result in the parts staying cool for too long, which will cause other members to overheat.

If they are too close to each other, the temperature will be unusually high.

A lot of this information comes from WellPCB, an organization that specializes in exploring new ways to micromanage PCB temperatures.

PCB Temperature Transfer Channels

A common thing about temperature is that they are never static. Temperatures generally never stay the same. It is aware of this, as well as multiple channels of PCB temperature transmission.

Temperature is affected in many ways, and one of the ways that you can micromanage both the general temperature in your PCB and the components of the PCB is to know not only about these channels but also what parts of the PCB utilize which channel.


When people refer to thermal energy in the form of electromagnetic waves, they are talking about radiation.

Radiating heat is usually generated passively, meaning that you cannot directly lower or increase the temperature by radiation.

Radiant heat has an almost negligible effect on PCB temperature.

At the same time, it is also the channel that you should probably worry about the most. It is because PCB temperatures are also affected by thermal energy.

When it comes to temperature, nothing is truly negligible. Think of what would happen if an airplane were to move just one degree off course.

If this happens, it will land in a different location than planned, no matter how short the distance could be.

PCB temperatures operate the same way. If a PCB needs to be at a temperature of 30 degrees Celsius to function optimally but stays at 32 degrees for a very long time, the results will not be desirable.

While there is no way to micromanage radiating heat directly, it is possible to micromanage radiating heat indirectly.

Being in an environment with consistent temperature when building and manufacturing PCBs is one way to do this.


Convection takes place when heat is transferred to fluids or air. Unlike radiation, convection is completely direct and has a powerful effect on overall PCB temperature.

The most famous example of convection is when cooking something. After all, nearly all ovens are convection ovens.

The heat from the oven is transferred to the air, which allows it to heat things.

“Cooking” also takes place when it comes to PCB materials, and just like it is essential to know your temperatures when preparing food in a kitchen, it is also necessary to know your temperatures when heating PCB materials.


The most direct form of temperature transfer channel is conduction. In conduction, heat is transferred between a heat source and a heat sink.

The most potent example of this is when lightning strikes something metallic or fluid. In these examples, the heat source is lightning, and the heat sink is liquid or metallic.

Knowing what components of your PCB function as heat sources and which parts of the PCB function as heat sinks is an excellent way to determine when it is a good idea to decide what kinds of currents components can withstand.

PCB Temperature Tolerance

PCB manufacturers also have trouble with overheating components in PCBs because they have not taken the time to learn what kinds of temperatures material can withstand.

Just knowing this and making a list is something that every manufacturer should do. Keeping a list on hand displaying how hot each material can get is very useful and, in many cases, necessary.

For example, the PCB panels contain a material called FR-4, which can withstand temperatures up to 90 to 110 degrees Celsius.

Therefore, when preparing a PCB with FR-4 materials, you should be aware of any currents that involve this material that could exceed 110 degrees Celsius. 

Knowing what kinds of temperatures the panels of the PCBs you plan to manufacture is one of the most critical aspects of micromanaging the temperature of a PCB, but also one of the most overlooked.

How to Measure PCB Temperature

It is essential to understand what kinds of temperatures your PCB panel materials can withstand. It is also necessary to know how heat is transferred among the components of the PCB.

Knowing these things will help you micromanage your overall PCB temperature. Another thing that is good to know is how to measure PCB temperature.

Measuring, in this case, does not mean checking the environmental temperatures that are displayed.

It instead refers to measuring how the temperature increases and decreases. Knowing these processes is one of the most accurate methods of measuring overall PCB temperature.

There are a few things that you need to identify before measuring PCB temperature this way. These are the primary heat source and the temperature sensor. It is how most of the heat is generated and where most currents take place.

The next thing to do is to find the GND pin of the heat source. It is usually connected to the substrate of the heat source.

After doing this, you can measure PCB temperature by doing these three things:

Using a common ground plane between the temperature sensor and the heat source.

You are connecting the GND pins of all temperature sensors to the ground plane of the heat source.

You are keeping the temperature sensor and heat source reasonably close to each other on the PCB.

Doing this will allow you to accurately and consistently track the global temperature of the PCB and the primary heat source.

Results Caused By Excessive PCB Temperature

Knowing how to measure PCB temperatures accurately and adequately is one thing. But what happens when the components and materials of a PCB get too hot?

Excessive temperatures will destroy the integrity of the layer.

What happens when something gets unusually hot or cold? They expand and contract, respectively.

PCBs are no different. The layers of the PCB are sensitive to temperatures. Excessive temperatures will warp any PCB layer’s length, width, and thickness if they are not micromanaged.

Going back to the example of convection in chapter 2, this is similar to leaving food in the microwave for too long, causing the food item inside to explode.

A similar thing happens to PCB layers if they are overheated.

Thermal energy expands most substances, altering them.

Substances expand when overheated, Altering their shape in some way.

Circuit materials are not exempt from this. High temperatures can and will change the shape of the transition lines in these circuit materials. When this happens, it will change the dimensions of the circuit materials themselves.

It will result in straight losses, distortion, and frequency shifts in-circuit materials.

Materials expand at different rates.

Materials in a PCB will not only expand when around high temperatures, but they will also expand at different rates.

The surface of a PCB is made up of either dielectric layers or conductive metal layers. These layers expand to different limits at different speeds. These differences are not just separate from dielectric and conductive. No dielectric or conductive layer is created equal.

One of the most common mistakes any PCB manufacturer can make is confusing these two layers. Make sure to take the time to know which layer you are working with.

Board soldering requires different temperatures.

Welding and soldering is a necessary skill for anybody who wishes to produce, test, and manufacture PCBs.

Knows what kind of temperatures to work with when welding and soldering is something that anybody in a PCB manufacturing firm needs to know, even if they are not directly involved in the welding and soldering of any materials.

Choosing the Right PCB Materials

Another way to micromanage and correctly set temperatures for PCBs is to choose the proper materials for the plates. Choosing the wrong materials will make it much more complicated than it should be to micromanage these temperatures.

The most common material for a PCB plate is called FR-4. Anybody who is just starting in WellPCB. We will provide you with a one-stop service and high-quality products.

You can send us the documents you need to make and get a quote immediately! What are we waiting for?

We have ten years of PCB manufacturing or who want to minimize risks should choose this material. A common thread about FR-4 materials is that they can resist temperatures well.

Two other materials are not as common as FR-4, and these are polyimide and RF.

While these two do not resist temperatures and FR-4, they have other properties that FR-4 materials do not have.

This list will provide most of the information you’ll need regarding these materials regarding their specific temperature capacities.

PCB Temperature.jpg

Methods of Reducing PCB Temperature

Finally, it is time to explore ways to reduce PCB temperatures. These can be applied to any material of any PCB.

Heat sinks

Parts, materials, and components of PCBs all generate heat. A proper heat sink will dissipate this heat, allowing for heat to be micromanaged.

Cooling fans

Nearly every electronic device contains a fan, but many do not understand what its purpose is. 

Whether part of a fully completed electronic device or part of a WellPCB, we will provide you with one-stop service and high-quality products.

You can send us the documents you need to make and get a quote immediately! What are we waiting for?

We have ten years of PCB manufacturing devices; the purpose of a cooling fan is to allow hot air out of the device while letting cool air into it.

Thicker plates require more power to reach high temperatures.

Plate thickness is one of the more confusing issues that manufacturers face when dealing with PCB temperatures. 

While thicker plates take more power to reach higher temperatures, the more comprehensive a dish is, the less it resists.

It can slow the temperature. This anomaly allows yet another method of controlling PCB temperatures.

Heat pipe integration considerations

PCB Temperature.jpg

What is the primary purpose of any given pipe? It is to organize the flow of any given substance.

It is also true when micromanaging PCB temperature, as liquids involved in PCB production can absorb heat, evaporate, and then condense back to liquid.

This kind of process allows you to continue working with whatever materials and components you need to work with while at the same time micromanaging the temperatures involved automatically.

What Temperature Should You Solder?

A good soldering outcome depends on the material you use. Otherwise, you risk incorrect placement or damaging the board and components. 

For a lead-based solder, you must set your equipment to the lead’s melting point. Lead’s melting point is between 600 and 650 degrees Fahrenheit(316°- 343°C). 

However, you can also use non-lead material to solder.

 In this case, set your equipment starting at 650 degrees Fahrenheit to 700 degrees Fahrenheit(343°- 371°C).

Maintain these soldering heat limits to maintain the soldering tip’s lifespan.

Why Should You Monitor PCB Temperature?

Improper temperature management in PCB manufacturing or handling has a domino effect, ultimately resulting in total failure of the PCB. 

Any problems caused by not monitoring PCB temperature spread to more parts of the board. 

Monitoring PCB temperature is important for the following reasons.

It Prevents Circuit Line Disruption

Circuit line disruptions are a common negative effect of overheating. 

You risk expanding and changing the circuit line shape by applying too much heat. Further problems stemming from circuit line disruptions include:

  • Changing conductor impedance value from 50 ohms
  • Frequency shifts
  • Damaged millimeter-wave and microwave circuits

Ultimately, you lose the entire PCB.

It Prevents Component Oxidation

Monitoring prevents overheating which erodes the laminate coating, exposing the PCB’s dialectic material. 

Without the laminate coating, the material becomes susceptible to oxidation, which leads to rust. Rust leads to high dissipation and eventual loss of transmission lines. 

Monitoring Prevents Unequal Material Expansion

PCBs have a dialectic and conductive metal layer, each with a different expansion rate. Monitoring prevents overheating that would otherwise expose each layer to expansion and eventual separation. 

The layers would pull apart, ruining the entire PCB.

Monitoring is Important in Maintaining the PCB Structure

PCB layers are precisely measured during the design phase. 

Close observation prevents overheating that expands different layers and distorts the  PCB’s different dimensions. 

Dimension distortion renders the PCB uneven and unusable. 

How Much Temperature is Good for a PCB?

A good temperature for a PCB ranges between 194 to 230 degrees Fahrenheit(90 to 110 degrees Celsius). 

This temperature range is standard for FR-4 or glass epoxy laminate PCBs, which comprise most of the available PCBs. 

However, some PCBs made for high heat tolerance with materials such as ARLON 85N and VT-90H can withstand temperatures up to 338 degrees Fahrenheit(170 degrees Celsius). These PCBs are known as high-temperature PCBs, and they’re perfect for maximum glass transition. 

What temperature will damage a PCB?

Standard PCBs that can withstand regular temperatures will retain their structural integrity at about 248 degrees Fahrenheit (120 degrees Celsius). Yet, PCBs designed for high-heat operations can withstand about 338 degrees Fahrenheit(170 degrees Celsius). 

Temperature damage on PCBs depends on the material. Materials such as aluminum can withstand temperatures as high as 1220 degrees Fahrenheit (600 degrees Celsius) before they melt. 

What temperature should PCB be stored at?

You must store your PCBs in a monitored environment between 53 and 86°F. Also, the environment must maintain humidity levels below 75-85% for the PCB to maintain its conductive state and avoid oxidation. 

Limit the storage time to between 2 and 10 years in the monitored environment.

What is the temperature class of PCB?

PCB temperature class is a rating system that determines the maximum surface heat a PCB can take before it is a fire hazard during operation. The rating, from T1 to T6, starts as low as 185 degrees Fahrenheit for T6 to as high as 842 degrees Fahrenheit for T1. 

Check the protection and material of the PCB to know the temperature class of the PCB. Also, it’ll be on the product label.  


If you possess an acute attention to detail and are well informed, it is not difficult to understand the causes and solutions surrounding PCB temperature. Additional information can be found in WellPCB’s article archives as well.

There are many things to learn when it comes to micromanaging PCB temperatures, and the key to doing this is to be patient and consistent.

Mastering the art of managing PCB temperatures takes time, and guides like this are designed to save a lot of it.

WellPCB has been specializing in the correct PCB service provider. Thankfully, there have been various PCB manufacturing fields for some time.

We are committed to providing information for other PCB manufacturers and providing the best materials, components, and services for both.

Avatar photo
Emma Lu
Our professional engineering support saves our customers a lot of trouble and loss. >>>>>> After you place the order, our engineer will conduct technical reviews to make sure the parts can be mounted well/correctly on the boards. We will check if the component packages match well with the Gerber footprints, if the part numbers you provided match well with the descriptions, and if the polarity is clearly marked. >>>>> When your design is ready, please send your Gerber and BOM so we can quote and start!