Home - Blog

Rigid-Flex Boards – What You Need To Know

Rigid-Flex boards are composed of rigid and flexible circuit boards that are permanently connected. The proper application of Rigid-Flex circuit boards offers optimum solutions for complex, limited space conditions. 

1. What are Rigid-Flex Boards

After review by CAM engineers process and plan the related documents, the FPC and PCB production lines are engaged.

Once the design is completed, it is issued to a factory to produce flexible and rigid bonded boards.

These two boards are flexible and brutal. Once created, according to the electronic engineer’s planning requirements, the FPC and the PCB are seamlessly pressed together in the press machine.

Then through a series of specific steps, the flexible and rigid bonded boards are finally made.

These steps are critical to achieving the board requirements, and a full inspection is performed.

2.WellPCB Manufacturing

We have completed R&D for 1-4 layers flex and rigid-flex board and passed the qualification tests.

We can accept, after review, some specific requirements for rigid-flex boards. Our R&D is continuously investing in innovating other high-tech products.

For our flex and rigid-flex products, we offer various cost-effective solutions and capabilities ranging from single or double-sided circuitry to higher technology multilayer designs up to 6 layers.

From selecting the best functional configuration to choosing the proper connectors or components, we will strive to meet or exceed your application’s requirements.

3. Our Products Display

Rigid-Flex Boards 1.jpgRigid-Flex Boards 2.jpg
Rigid-Flex Boards 3.jpgRigid-Flex Boards 4.jpg
Rigid-Flex Boards 5.jpgRigid-Flex Boards 6.jpg
Rigid-Flex Boards 7.jpgRigid-Flex Boards 8.jpg
Rigid-Flex Boards 9.jpgRigid-Flex Boards 10.jpg
Avatar photo
Emma Lu
Our professional engineering support saves our customers a lot of trouble and loss. >>>>>> After you place the order, our engineer will conduct technical reviews to make sure the parts can be mounted well/correctly on the boards. We will check if the component packages match well with the Gerber footprints, if the part numbers you provided match well with the descriptions, and if the polarity is clearly marked. >>>>> When your design is ready, please send your Gerber and BOM so we can quote and start!